Explain the daily use of THK linear guides
THK linear guides are precision linear guide transmission components, so you need to be very
cautious in the process of use. Even if you use high-performance THK linear guides, if you do not
operate properly, you can not only achieve the desired performance, but also easy. Causes damage
to the THK linear guide. Therefore, here are some of the things you should pay attention to in the
daily use of THK linear guides:
In order to prevent corrosion
When directly holding the THK linear guide by hand, the sweat on the hand should be
thoroughly cleaned and coated with high-quality mineral oil before use, especially in the rainy season
and summer, special attention should be paid to rust prevention.
Keep the environment clean
Keep the THK linear guide and its surroundings clean and tidy. Even tiny dust that is invisible
to the naked eye enters the guide rail, which increases the wear of the guide rail, causing vibration
The linear guide must be carefully installed during use. It cannot be punched hard. It cannot
be hit directly with a hammer. It cannot transmit pressure through the rolling elements.
Correct installation tool
Linear guides require the use of appropriate and accurate installation tools. Use special tools
as much as possible to avoid the use of cloth and fiber.
Related Industry Knowledge
- Bearing maintenance, overhaul and troubleshooting
- THK ball screw installation method
- What factors should be considered when designin...
- Linear slide selection tips
- Installation of THK linear guides
- Precautions when using linear guides
- Do you know about THK linear guides?
- Advantages of rolling bearings
- How can we solve the noise generated by THK lin...
- How to clean the linear guide
- How to solve the problem of THK ball screw
- What are the repair cases for THK linear guides?
- What are the main performance hotspots of THK r...